Custom builds using Corvette suspension are extremely common on just about any chassis, and as you well know, proper racing vehicles need to be customized to achieve their maximum performance. For that reason, we offer our Corvette suspension bushings for individual control arms so you can tailor your race car or custom build to your exact specifications.
These bushings fit the C6 Z06 and ZR1 Corvettes as well as the C7 Corvette rear upper control arm (RUCA), in other words, the aluminum-framed cars. C6 base and Grand Sport chassis are steel and require a different kit. If you are planning a custom build, these bushings mount with two 10mm bolts into threaded holes in the chassis (similar to the mounting of the front upper control arms on all C5, C6, and C7 Corvettes).
Bushings are sold in a set of four to cover both the left and right side RUCA's. All materials are available, just select them from the dropdown menus. Please note that offset bushings are not available for the RUCA position of aluminum-frame cars, however, the trunnions are machined in a way that creates a small amount of additional negative camber over the stock configuration.
If the product is listed as backordered, you can still place an order for it, however there may be up to a two week lead time before shipping. Please consider this before you order. If you have specific timing needs, contact us to confirm the shipping/arrival dates.
