Take your Corvette to the next level with our Premium Delrin 100AF bushing kit for the C7 Corvette. Originally designed for the US Navy, Delrin 100AF is Delrin impregnated with Teflon, resulting in extremely low friction, self-lubricating bushing. While more expensive, the Delrin 100AF of our premium kit will give a long service life with zero maintenance.
NOTE - The Removal Kit is not required, but is recommended. There are two ways to remove the old bushings: the cut out method and the press out method. If you are cutting out the stock bushings, you do not need the removal kit. If you are pressing out the stock bushings, the removal kit includes the spacers and adaptors to allow you to use a hydraulic press. The removal kit is not needed to press in the Delrin bushings.
The Borg Motorsports bushing kit includes all bushing positions for the Corvette control arms, 16 total locations. Please note that the shock bushing is not included as Delrin is not the proper material choice for the kinematics of the shock mount location. Each location has a front and rear bushing. Bushings with through bolts have metal sleeves to spread the load in each bushing over as wide an area as possible, reducing wear and tear on the Delrin. Full-width bushing lips spread longitudinal suspension loads over as large an area as possible, again maximizing the life of the bushing as well as preventing wear on the subframe components.
Bushings are legal in SCCA ST and SP classes, as well as any class requiring no more metal in the bushings than stock.
If the product is listed as backordered, you can still place an order for it, however there may be up to a two week lead time before shipping. Please consider this before you order.
Unboxing Video
Installation Video
